Tel: +86-576-84066991
Home > Knowledge > Content

Add: No.28 Kangqiang Rd., North Industrial Zone, Huangyan District, Taizhou City, Zhejiang, China
Post Code: 318020
Tel: +86-576-84066991
Fax: +86-576-84066992
Mob: +8615205861100/+8615068643388
Contacts: Amelia Xiang/Fiona Hong

The mold factory's opinion on discoloration

Taizhou Huangyan Master Mold Co.,Ltd | Updated: Apr 24, 2018

We often find that the mold is not the ideal silver bright color, what causes it?

There are generally three situations:

1. Mould processing and processing.

When the die steel is treated with nitrogen, it is easy to make the mold surface become black and blue, which is an easy phenomenon in the process of high temperature nitriding.

2 mold injection process.

In the process of product production, the temperature of the material cylinder is too high, which can cause the decomposition of plastic, and it can be turned black on the mold and some plastics.

The additives also can be decomposed in the heat, such as ultraviolet absorbent antistatic agent release agent.

3 mold design

Some of the mold design is not paid attention to the pressure flow rate of the sprue of the mold, the friction is too hot, the exhaust of the mold is also very important, when the exhaust is bad,

The temperature is concentrated and the coking becomes black.

Therefore, in order to make the mold more "beautiful", we should consider the mold cavity number, weight, shadow area and other parameters of the product in the design, and try to gate it.

Reasonable exhaust design. The product will be inspected and cleaned up for a period of time.